HPE EVA Storage

eva 4400 user creation

 
gobi_1
Frequent Advisor

eva 4400 user creation

hi guys we have a starter kit eva4400 in our office and the command view eva is installed and embedded to its controller.

how can i create new user and password? unlike with dedicated proliant storage server. Thanks
3 REPLIES 3
Kites BM
Regular Advisor

Re: eva 4400 user creation


Hi,

I think you should create an user account the server or Host on which EVA is installed and map that account to Securtiy Groups available. For eg:
1.\HP Storage Users
or
2.\HP Storage Admins

Kites BM
Víctor Cespón
Honored Contributor

Re: eva 4400 user creation

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01681299/c01681299.pdf

HP StorageWorks Command View EVA user
guide

Configuring the password for array-based management

Click Launch OCP on the Management Module Properties page to start the WOCP:
2. To change the storage system password, select Configure Administrator login options.
3. Under Management Server Password, enter the new password in the Password box.
4. Enter the password again in the Confirm Password box.
5. Click Set Password.
Niels Vejrup Pedersen
Respected Contributor

Re: eva 4400 user creation

Agree - Needs to be done on the WOCP interface.

Regards