eva6400 scsi error

 
Daniel Kujawa
Occasional Contributor

eva6400 scsi error

Hello,

Our 6400 keeps returning the following scsi busy messages to 2 servers that are connected to it:


kernel: sd 1:0:4:2: SCSI error: return code = 0x00020000
kernel: end_request: I/O error, dev sdjv, sector 195796992
kernel: device-mapper: multipath: Failing path 65:400.
multipathd: dm-44: add map (uevent)
multipathd: dm-44: devmap already registered
multipathd: 65:400: mark as failed
multipathd: malsto05_ldtoradata2: remaining active paths: 7
multipathd: sdjv: tur checker reports path is up
multipathd: 65:400: reinstated
multipathd: malsto05_ldtoradata2: remaining active paths: 8
multipathd: dm-44: add map (uevent)
multipathd: dm-44: devmap already registered


the eva doesn't show anything in the CV EVA logs. I've upgraded to the latest RHEL5 multipath software but no difference.

Any ideas or suggestions ?

Thanks

 

 

P.S. This thread has been moevd from Disk, Disk Arrays (Retired Discussion Board) to Storage Area Networks (SAN) (Enterprise). - Hp Forum Moderator