HPE EVA Storage

evainfo needs libIO.sl

 
Joseph Fisher
Occasional Contributor

evainfo needs libIO.sl

I just downloaded "evainfo", but when trying to execute it, I get the error saying:

evainfo -h
/usr/lib/dld.sl: Can't open shared library: /usr/lib/libIO.sl
/usr/lib/dld.sl: No such file or directory
Abort(coredump)

Can anyone tell me which patch or software needs to be installed to supply this shared library?

TIA

Joe F.
4 REPLIES 4
Rob Leadbeater
Honored Contributor

Re: evainfo needs libIO.sl

Hi Joe,

Which operating system are you trying to run evainfo on ?

Cheers,

Rob
Rob Leadbeater
Honored Contributor

Re: evainfo needs libIO.sl

Maybe this will help:

http://docs.hp.com/en/5991-6469/ch10s17.html

It looks like it should be included on HP-UX... You're not using the Itanium version of evainfo on a PA-RISC box are you ?

Cheers,

Rob
Thomas J. Harrold
Trusted Contributor

Re: evainfo needs libIO.sl

I am seeing this as well. I was told that the 11.31 version of evainfo would work on 11.23 (itanium), but I receive the same error message.
I learn something new everyday. (usually because I break something new everyday)
Josef Watzko
Occasional Advisor

Re: evainfo needs libIO.sl

Hi,
attached is an older version of evainfo which works without the libIO.sl on PA-RISC systems.

Or if installed use vxdmpinq, e.g.:

# /etc/vx/diag.d/vxdmpinq -e 1 -p 131 /dev/rdisk/disk32

Inquiry for /dev/rdisk/disk32, evpd 0x1, page code 0x83
/dev/rdisk/disk32: Raw data size 40
Bytes 0 - 9 0x00 0x83 0x00 0x24 0x01 0x03 0x00 0x10 0x60 0x05
Bytes 10 - 19 0x08 0xb4 0x00 0x01 0x47 0x44 0x00 0x00 0x90 0x00
Bytes 20 - 29 0x02 0xa7 0x00 0x00 0x01 0x14 0x00 0x04 0x00 0x00
Bytes 30 - 39 0x00 0x02 0x01 0x15 0x00 0x04 0x00 0x00 0x00 0x01
--
Bytes 8-24 is the WWN

Josef