HPE EVA Storage

fabricshow not showing ethernet IP address

 
shashi kanth
Super Advisor

fabricshow not showing ethernet IP address

I have 3 brocade 300 switches cascaded into one fabric.

On one brocade switch, if i issue fabricshow command, it displays all the three switches with their IP address.

But on the remaining two switches, if i do Telnet/SSH and issue a fabricshow command, it is showing all the three switches with their WWN, but it doesn't show IP address for one of the switch.

How can i solve this problem ?

Thanks.
1 REPLY 1
Kites BM
Regular Advisor

Re: fabricshow not showing ethernet IP address


Generally the o/p of fabricshow command shows the following information

switch1:uname> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
-------------------------------------------------------------------------
1: fffc01 50:00:51:e5:47:e8:af:27 0.0.0.0 0.0.0.0 "switch1"
11: fffc0b 10:00:00:05:1e:a0:28:60 10.92.50.10 0.0.0.0 "switch2"
13: fffc0d 10:00:00:05:1e:8c:33:01 10.92.50.12 0.0.0.0 "switch3"
15: fffc0f 10:00:00:05:1e:8c:33:00 10.92.50.14 0.0.0.0 >"switch4"
17: fffc11 50:00:51:e5:47:ea:ae:03 0.0.0.0 0.0.0.0 "switch5"

The Fabric has 5 switches

what o/p are u getting?