HPE EVA Storage

how to simulate a failure on EVA to verify that the IRS works

 
daedro
Frequent Advisor

how to simulate a failure on EVA to verify that the IRS works

Hi everyone,

 

Somebody knows how to simulate a failure on EVA P6500 to verify that the IRS is working, i mean, without provoke a hardware failure like taking off one cable or something like that, if there is a way to do it from the command view.

 

thank you in advance

2 REPLIES 2
Steffeo
Visitor

Re: how to simulate a failure on EVA to verify that the IRS works

Sure; go into CV and a diskgroup, and set the threshold level to very low; that will generate an alert. You can also go in to command line and write wccproxy test, verify communication between cms and CV server.

WernerCH
Advisor

Re: how to simulate a failure on EVA to verify that the IRS works

With CV-EVA 9.3 and newer select an active EVA. Then under "System Options" click on "Perform remote service test".

 

Regards, Werner

WernerCH