HPE EVA Storage

hp2000 G3 new raid 6 setup

Occasional Contributor

hp2000 G3 new raid 6 setup

Recently started a new raid configuration to raid 6 from 5 and now i cannot see the raid via disk management on our server. on the SAN all lights are green. Looking at device manager i also cannot see that the SAN in connected even though the cables have not been moved from when it was working before.  Any ideas what i should be checked,i assume something on the SAN but cant think what.

Acclaimed Contributor

Re: hp2000 G3 new raid 6 setup

If you create a new vdisk with new volumes, you need to map them again to the servers, Did you do this?

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!