1748275 Members
3812 Online
108761 Solutions
New Discussion

management module

 
SOLVED
Go to solution
ess
Super Advisor

management module

hi

i have eva 4400 .when update management module i see all controller uknownon .i update firmware but not resolve problem 

please help my.

14 REPLIES 14
Rajiv
HPE Pro

Re: management module

Have you tried restarting the Management Module, also what firmware was upgraded on the Management Module.

 

Thanks,

Rajiv

I work for HPE

Accept or Kudo

ess
Super Advisor

Re: management module

hi

yes i reset the management module but not resolve and version firmware is 1.00.00.080211.

when login with management module wwn not set and all is 0 but i install cv version 9.4 on the 1 dl360g6 and when login with them i see wwn is set and eva is right work and not any problem detect. please help.tanks for best guide.

Johan Guldmyr
Honored Contributor

Re: management module

Hi, what did you update? How did you do it?
It would be nice to know what version was on it before you tried to upgrade.
Maybe the WOCP can tell something, I presume the 'wwn is not set' is in Command View?
If you upgraded the server to 9.4, I hope you upgraded the mm CV to that too.
ess
Super Advisor

Re: management module

i update mm(managmenet module) with console mean connect to ip management module and update this.xcs firmware controoler is 10000000 and see uuid unique half both controller is 0000-0000-0000-0000 and xcs version is empty and xcs build is empty.

why?

Johan Guldmyr
Honored Contributor

Re: management module

Did you upgrade to CV 9.4 before you put XCS 10 on the controllers?

I guess it's looking like that because your mm firmware is too old.
ess
Super Advisor

Re: management module

hi 

 

i first update xcs and next install cv9.4.

please send my link for download firmwaare update mm.

 

tanks for help

Johan Guldmyr
Honored Contributor

Re: management module

The firmware for the mm is in the CV 9.4 iso.

Did you read the "Update Product Software Guide?

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02858292/c02858292.pdf

I looked briefly and it looks like you should upgrade CV before you upgrade the XCS.
ess
Super Advisor

Re: management module

hi 

very tanks for firmware mm.ineed know how to downgrade xcs?

Johan Guldmyr
Honored Contributor
Solution

Re: management module

From the link I pasted above.

"Upgrade paths
For details about supported upgrade and downgrade paths, see Table 3.1, Upgrade support for
controller software versions, and Table 3.2, Downgrade support for controller software versions,
respectively, in the HP P6000 Enterprise Virtual Array Compatibility Reference"

Link to compatibility ref: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02523047/c02523047.pdf

Downgrading from XCS 10 to 09534 has this note:

"
1
An offline downgrade with an array initialization is required. The array initialization results in data loss or a restore"