HPE EVA Storage

open port at firewall for EVA P6000

 
jclee
Occasional Contributor

open port at firewall for EVA P6000

Hi

There are three EVA P6000s and customer did set IP addresses with Management Module.

Customer tried to access all EVAs at management PC through Chrome but he can’t access.

He checked ports blocked at firewall and he found he need to open ports such as 34562, 52705 and 56438.

After opening customer can access all EVAs. The three EVAs uses each different port.

Customer’s questions are “Why should customer open three separate ports such as 34562, 52705 and 56438 ?”

and “Are there any port policy with EVA for firewall ?”.

Port permitted at customer firewall :

2372, 2374, 5988, 5989, 2376, 2377, 2379, 860, 2386, 3202

Controller firmware version : 11200000

Command view EVA version : 10.3

2 REPLIES 2
StorageMike
HPE Pro

Re: open port at firewall for EVA P6000

HI

Take a look at https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03472908 page 16 onwards. There are defualt ports but you can also configure custom ports during the installation of command view

I work for HPE

Accept or Kudo

jclee
Occasional Contributor

Re: open port at firewall for EVA P6000

Thank you for your reply.

I already gave port information of installation guide to customer but it didn't work....