problem license fabric after reboot hp storageworks 8/24 ports AM868A

[otmani]

hi

after power failure.the switch reboots ok .

but when i verify the license . the license for full fabrix disappeared.

i don't understand why.someone does have this problem.

Switch AM868A  version Fos V6.4-1

thanks

regards

[Johan Guldmyr]

Hi, . Are you having problems because of this too?

Contact HP Support so that you can get a replacement key. You'll quite likely need receipts.

[otmani]

hi 

my  problem is resolved .i must entered the license of my switch.

but i don't know why my switch lost  the license after power failure.

thanks for your help regards

[Greybeard]

was it entered into the running config and not saved? not sure if that can hapen but a reboot would lose all the other settings under those circumstances.

[Johan Guldmyr]

The Brocade switches don't work in the same manner as the Cisco switches.

On the Brocade just hit 'licenseadd license' and then it's in the config.