servicemag resume 0 13 -- failed.Please run servicemag status -d for more details

[Tabriz1]

Hi Dear community,

l replaced the failed disk with new sff disk.After replace the disk l  run this command servicemag status 0 13 and this error appeared  'servicemag resume 0 13 -- failed.Please run servicemag status -d for more details'

How l can fix this problem ,

Thanks

[Tabriz1]

[sbhat09]

Hi Tabriz,

Your screenshot is not visible. Can you please post the new screenshot covering only the text area?

Regards,
Srinivas Bhat

[Tabriz1]

[Tabriz1]

Hi @sbhat09 ,

Thank you for your attention.

[sbhat09]

Hi Tabriz,

Have you done 'admitpd' before servicemag resume?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

[Tabriz1]

l run the admitpd command but is failed.

when l run showpd commands l looked at the same disk (l added the new disk to cage)

id                                     type                      state                      detailed_state

--- 0:13:0                      unknown               degraded invalid,inquiry_failed

and the failed disk status showed

13  0:13:0                     FC                     vacated,missing,invalid_media,multiple_chinklets_media_bad,servicing unknown

[sbhat09]

Hi Tabriz,

Servicemag resume works only after successful 'admitpd'. Please try to find why admitpd is not working.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!

[Tabriz1]

the description of admitpd command is

Checking for drive table upgrade packages

0 disk admitted 1 disk failed.Please use showpd -s to view detailes of each failed drive

[sbhat09]

Hi Tabriz,

Here the admitpd is failing. Is the new PD you replaced, of same model and capacity as the one you removed from the slot before? What is the command you have run to admit the PD?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!