unable to connect EVA Command View due to adobe flash payer issueissue

[DSinghp]

Hi Team, Unable to connect EVA Command View due to adobe flash payer issue, I have follow below link but it's not worked.

[DSinghp]

I have follow below link but not worked for me.

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-kc0119057en_us

[Denialmix · Accepted solution]

My solution:

https://community.hpe.com/t5/HPE-EVA-Storage/End-of-life-Flash-2021-Solution-for-Array-Based-Management-ABM/m-p/7118276/highlight/true#M68841

[DSinghp]

Thanks for your advice, but i am getting error "Failed to connect to Securty conpoenent".

what is mean by "yourABMorCVaddressIP" 

[veeyarvi]

Hello Dsinghp

ABM means the "Array Based Management" - There is a management module with embedded Command View features for EVA 4400 and P6000 EVA family. It has an IP assigned and uses the same for access. The CVaddressIP also pointing to the Command view EVA (ABM or SBM (server based CV) IP.

You cannot use the Command View without Flash Player. Either you need to use the method as mentioned above by 'Denialmix' (not tested) or contact HPE support for an embedded browser which can be used until December 2021 (End of Support Life for EVA family). This is only applicable for arrays in active support.

[DSinghp]

Thx buddy it's working perfectly!!!!