HPE Insight Cluster Management Utility (CMU)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP CMU 7.2 Failed to scan and discover SL4540 node

SOLVED
Go to solution
kksia
Occasional Contributor

HP CMU 7.2 Failed to scan and discover SL4540 node

Hi,

I have problem in deploying CMU to scan and discover SL4540p G8 nodes.

 

I have installed CMU on DL380p G8 with RHEL6.4. Configured 3 network segments. One for iLO, one for Application for public access, and one for Private that communicating to 24 SL4540 nodes.

 

I want to install one SL4540 node as golden image and to clone to the rest of 23 nodes.

 

I have configured iLO IP on SL4540, and have configured PXE boot as well.

 

Next, when I want to scan new node from CMU, I entered iLO IP and Node IP that going to configured on SL4540 when have OS installed, but no node was found in scan.

 

What and how should I go to get this work?

 

Thanks.

2 REPLIES
Dave-SBS
Advisor
Solution

Re: HP CMU 7.2 Failed to scan and discover SL4540 node

Did you set up a user account on ALL iLOs that have the same password?  

 

The default used by HP is admin/admin. You may have to use admin/admin123 if you did not set the default minimum password length to 5 or lower.

Chintala
Advisor

Re: HP CMU 7.2 Failed to scan and discover SL4540 node

Hi,

 

Is this a customer cluster or internal cluster ?

If it is customer cluster please raise an issue preferably at local HP support center.

 

 

Is the ILO ip of SL4540, reachable from CMU management node ?

 

 

Is ILO login-id and password same for all the nodes ?

 

 

How are you trying to scan the nodes ? Is it using GUI or Command line ?

 

 

When you try scanning what is the error message you are seeing ?

 

 

Can you please get us the following logs :

 

# /opt/cmu/log/getMacByNodeProliant.sh-<ILOIP>.log

 

 

Please follow section 4.3.11 of user guide for more details on scanning nodes. 

 

 

Regards,

Abhishek Chintala