HPE Community
Security e-Series
1752793 Members
5832 Online
108789 Solutions
New Discussion

ARP MAC Spoofing on MSM710 Controler

 
SOLVED
Go to solution
alexIT
Occasional Contributor

‎06-19-2015 01:44 AM

‎06-19-2015 01:44 AM

ARP MAC Spoofing on MSM710 Controler

Hi All,

 

I've  a question, I'm working on my LAN and now specificaly about ARP Spoofing  detection on an MSM710 Controler, but I didn't find where I can configure this on the web management or CLI..

 

Anyone can help me ?

Thanks a lot,

Alex

0 Kudos
1 REPLY 1
alexIT
Occasional Contributor

‎06-24-2015 03:03 AM

‎06-24-2015 03:03 AM

Solution

Re: ARP MAC Spoofing on MSM710 Controler

Hello,

 


FYI, I didn't find anything on the controller. I bypassed this limitation with my Cisco Switchs and by activating DAI ARP Inspection on these.

Be careful, controler and access points uplinks mustn't contain "ip dhcp snooping trust" parameter in their configuration port.
If activated, IP Adresses and mac adresses won't be stored in dhcp snooping table.

 

Thanks

 

 

 

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.