Security e-Series
1747980 Members
3725 Online
108756 Solutions
New Discussion

Mac-address NOAGED with DOT1X PORT-MODE MAC-BASED

 
FabianoCh
Advisor

Mac-address NOAGED with DOT1X PORT-MODE MAC-BASED

 

We are installing voip phones. The computers are then connected to the phones. The switch ports are configured with dot1x port-mode mac-based.

The mac-address status shows “NOAGED”.  There was no problem before the phones when moving a computer from one switch port to another port.

Now the phone keeps the switch port always UP.  So computer’s mac-address is not cleared from that port.  When the computer is connected to

another switch port it does not authenticate since its mac-address is NOAGED in the port that it was previously.  How to deal with it ?

Thanks to any help.

1 REPLY 1
Ian Vaughan
Honored Contributor

Re: Mac-address NOAGED with DOT1X PORT-MODE MAC-BASED

Howdy,

Which switch model(s) do you have that you are seeing this issue on?

Can you give us a screengrab of the issue and maybe a fragment of the configuration on the switch.

You can configure inactivity timeouts as part of the port-security configuration that will drop the dynamically learned MAC after a certain time but we'd need to know what your setup looks like now to offer the best advice.

Hope that helps

Thanks

Ian

Hope that helps - please click "Thumbs up" for Kudos if it does
## ---------------------------------------------------------------------------##
Which is the only cheese that is made backwards?
Edam!
Tweets: @2techie4me