HPE Nimble Storage Solution Specialists

Event ID 1003 Nimble Connection Service

 
HCW74
Occasional Visitor

Event ID 1003 Nimble Connection Service

Hi Nimble Storage Solution Specialists,

I've a Windows 2012 R2 server which after updates and rebooted was filled with the following warnings:

Attempt to add a Path for Target=iqn, Failed, Error=EFFF000A, ErrorMsg=ISDSC_AUTHORIZATION_FAILURE, ValidPaths=1

I've also noticed that the one of the Initiator IP and target IP Address shown was wrong on the nimble connection manager. Is iSCSI Initiator the correct place to reconfigure? Will it reinitialize the existing volumes during discovery?

Thanks.

1 REPLY 1
dineshkumar_s
HPE Pro

Re: Event ID 1003 Nimble Connection Service

Hello ,

Looks like NCM was configured incorrectly. Do not change it in the MS iSCSI Initiator. If you need help, do contact the  Nimble Support.

 

Thanks 

Dinesh Kumar 


Accept or Kudo