Is Nimble Storage the boot from SAN is supported with HP-UX (any version)

[SEENIVASANP]

Issue:
Is Nimble Storage the boot from SAN is supported with HP-UX (any version)

Environment:
Nimble Fibre Channel arrays
HP-UX (any version)

[Hawkeye]

Generally speaking, Boot from FC SAN via a Nimble storage array is supported with HP-UX 11iv3 IA B.11.31.1603 (March 2016) or later, using the latest 8Gb & 16Gb FC HBA Stand-up PCIe cards, not directly connected.

[support_s]

System recommended content:

1. Boot from SAN support

2. HPE Boot from SAN Configuration Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[SEENIVASANP]

Would you able to direct me to some document about this?

[Hawkeye]

You can find Single Point of Connectivity Knowledge for HPE Storage Products (SPOCK) here:-  https://h20272.www2.hpe.com/spock/index.aspx

You will need to register or login with your HPE Passport account for access.

[SEENIVASANP]

So far, the share document did not provide any information about HPUX SAN boot with Nimble storage arrays.