HPE Nimble Storage Solution Specialists

Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

 
SOLVED
Go to solution
ioanp
Occasional Visitor

Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

We have to disable tls v1.0 and v1.1 on Nimble Storage and to leave only tlsv1.2 active. We are having dificulties finding any settings or information in regard to this matter. Could someone help us with some information or point us to a manual? Thanks

10 REPLIES 10
SprinkleJames
Frequent Advisor
Solution

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

Hi ioanp,

Do you have access to this KB article on InfoSight? There's some info there that may help you.

ioanp
Occasional Visitor

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

Hi James,

Thanks for the link, I was able to read it. 
It's very helpful. 

Katie2
Occasional Collector

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

Hi there. I have the same question for our CS3000 and CS5000 devices but the knowledge article link is no longer working. Is there some updated information you can forward me to please? And also, is the change persistent through reboots etc? 

Thank you. 

sants
Occasional Visitor

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

@SprinkleJames  Looks like this link is dead now. Is there another source for this?

SprinkleJames
Frequent Advisor

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

EricKoh
Occasional Visitor

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

Hi @SprinkleJames, the link seems dead again! Appreciate if you could prove it here again, or can you just past the commands here? 

Thank you so much!

SprinkleJames
Frequent Advisor

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

EricKoh
Occasional Visitor

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0 and 1.1

Thank you so much for your prompt response! 

StepInno
New Member

Re: Nimble Storage Model CS1000 - Software Version 5.0.6.0-593144-opt Disable TLSv1.0

Hello is the

command

group --edit --tlsv1_enabled {yes|no}


only going to affect the management? or does this affect iSCSI targets too we are using the Nimble with iSCSI connected to a pair of ESXi hosts. We need to make sure the iscsi are not impacted by this change.

We are using a CS300 and need to make sure its ok and supports TLS 1.2

Can you confirm?