HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

Alerting from iLO

Mazzemion
Occasional Visitor

Alerting from iLO

HP Oneview 2.00.07-0250853 running on the vcenter appliance

DL380 g7 monitoring license

Alerts from the iLO don't seem to show up in Oneview. I have a critical alert on the server at the moment I can see if I log into the iLO but nothing in Oneview. Is there anything else I need to configure to get these to show up?

3 REPLIES
Chris_L1
Advisor

Re: Alerting from iLO

I have been looking for the same - it appears that HPE does have such capabilities in the ILO as well as OneView - but AMS traps have to be configured on each ILO and AMS installed on each server and it appears to only work with ILO-4.

http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=5410258&docLocale=en_US&docId=emr_na-c04950825

This is what I have found so far...

ChrisLynchHPE
Neighborhood Moderator

Re: Alerting from iLO

Did you add the your DL380 G7 server to the appliance? You cant just configure the iLO to forward SNMP trap to the appliance.
Mazzemion
Occasional Visitor

Re: Alerting from iLO

Yes, it's been added in. Everything is showing up okay, no alerts. It just isn't making any mention of a failed drive on the machine.