HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

Audit log forwarding - enabled

 
Pavel_Majorov
Occasional Advisor

Audit log forwarding - enabled

Hello!

Updated today to 4.20 for Audit log forwarding. prescribed ip address of the server port. where exactly does the log? Or do we need some settings to do?

4 REPLIES 4
BhaskarV
HPE Pro

Re: Audit log forwarding - enabled

Hi @Pavel_Majorov 

Have you cheked the online help?
On the "Manage Audit Log Forwarding" settings page, click on the "?" on the top right hand side.
Alternatively you can refer to the online help hosted at hpe here: 
http://h17007.www1.hpe.com/docs/enterprise/servers/oneview4.2/cic/en/index.html#manage-audit-log-forwarding.html 

This page has the pre-requisites for audit log forwarding - UDP port opening on the firewall etc.
Do check and let us know if the feature worked for you.

 

Regards,
Bhaskar



I am a HPE Employee
Pavel_Majorov
Occasional Advisor

Re: Audit log forwarding - enabled

Сonfiguration committed for this link

http://h17007.www1.hpe.com/docs/enterprise/servers/oneview4.2/cic/en/index.html#manage-audit-log-forwarding.html 

test submission shows:

Test log entry was forwarded to configured destinations

No messages.
But there is no data on the destination server. sending to windows server 2016.  Looking at the event viewer> forwasrded events.
BhaskarV
HPE Pro

Re: Audit log forwarding - enabled

Hi @Pavel_Majorov 

Do you have rsyslog (or another similar) syslog server installed and configured on Windows?

Regards,
Bhaskar



I am a HPE Employee
Pavel_Majorov
Occasional Advisor

Re: Audit log forwarding - enabled

No.  thank you. I'll try to install.