HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

Automatically reconnect to previously unreachable devices

RonnyA
Occasional Visitor

Automatically reconnect to previously unreachable devices

Hi.

 

My environment is mainly located offshore, and every now and then the connection to the sites goes down.
Or the delay exceeds 5000ms

Is there an easy way to automatically refresh the device?
I have roughly 200 devices that i need to manage, so doing this manually with the delay i have towards the devices is a lot of work

2 REPLIES
running4life
Occasional Visitor

Re: Automatically reconnect to previously unreachable devices

I am wanting the same automatic reconnect.  The only thing I've been able to find is to run the collect remote support data.  This does seem to reconnect the systems, however it is a manual process not automatic.

whiteatwork
Advisor

Re: Automatically reconnect to previously unreachable devices

Hello,

you are probably already aware OneView was not designed to be used outside of a single DC network.  However, what you are looking for could be achieved by running a PowerShell (or equivalent) script.  Have a look at the below:

https://github.com/HewlettPackard/POSH-HPOneView/wiki/Update-HPOVServer