Can we use OneView to build from Baremetal on DL380 Gen10 with Server 2016

[AndrewUK]

Hi,

I would like to know if it is possible to have Openview auto build from baremetal a server such as a DL380 gen10 and install the operating system such as Windows Server 2016.

If so then do I need any additional addons, appliances or extra languages such as python to make it happen?

Regards A

[ronissac]

Hi , 

HP OpenView has been retired as from November 1, 2015. 

Below is the available documentation on HP Openview

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c04283053&doctype=quickspecs&doclang=EN_US&searchquery=&cc=ca&lc=en

Regards

Ronny

If you feel this was helpful please click the KUDOS! Thumbs below!

[AndrewUK]

typo.

I mean to say OneView not OpenView.

So the question remains. 

[ronissac]

Hi , 

Once you configure the ILO on the bare metal server, you may import it to the oneview console and apply all the hardware configurations (creating arrays, BIOS configuration , firmware baselines etc ), however oneview does not have the functionality to deploy the OS. You may deploy the OS from the intelligent provisioning (f10 during boot)

Regards

Ronny 

[ronissac]

Hi , 

Please let me know if you had further queries.

f issue got resolved then how?
This will help for everyone who are all following your forum.
If you feel this was helpful please click the KUDOS! Thumbs below!

Regards 

Ronny