HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

Gen8 Servers show as disabled after Oneview upgrade from 1.20.01 to 1.20.05

SOLVED
Go to solution
Jake2223
Occasional Contributor

Gen8 Servers show as disabled after Oneview upgrade from 1.20.01 to 1.20.05

I recently upgraded from Oneview 1.20.01 to 1.20.05. The upgrade when ok but now all of my Gen8 servers are showing as disabled. I can click on them and view their information but in the server dashboard and server hardware screen they show as disabled. I did remove one Gen8 server and added it back. After I added it back it was showing as green again. Is it possible to enable these servers again? I do not want to manually have to remove and add all my Gen8 servers again.

2 REPLIES
Jake2223
Occasional Contributor
Solution

Re: Gen8 Servers show as disabled after Oneview upgrade from 1.20.01 to 1.20.05

I rebooted Oneview and let it sit overnight and now all the servers are reporitning normal.

ChrisLynchHPE
Neighborhood Moderator

Re: Gen8 Servers show as disabled after Oneview upgrade from 1.20.01 to 1.20.05

Hmm...  Maybe the Enclosure Refresh or Server Hardware Refresh didn't complete after the appliance performed its reboot after the update.  Before you rebooted the appliance, did you try to refresh the servers?