HP OneView for Vcenter in test Environment not showing Server information from DL380G6 Running ILO2

[jason blake]

Hi....

I have in a test environment a DL380 G6 host running ILO2 with a standard License. (Not sure if this is the problem)

It is running an HP custom build of ESXI 5 and Vcentre5.0 via Vmware Essentials.

The Vsphere Client is showing the Hardware Status tab and all the sensors are running ok.

I have installed Oneview for Vmware vcentre on the Vcentre server and the Vsphere client is showing the HP management tab ok. I have added the appropriate ILO 2 ipaddress and and username and password. The Host even shows the ILO icon in the left hand corner.

The trouble I have is that the Server information is not being populated with any information. As shown below.

Anyone any ideas ?

P.S. This thread has been moved from General to Converged Management. - Hp Forum Moderator

[ChrisLynchHPE]

The Hardware Status page is a different mechanism and is not part of the OneView for vCenter plugin. When looking at the HP Management tab, click the Actions menu, then select Communication Status. What does that show?

[jason blake]

Hi Chris....

they say the following.... Unavailable. for both Server and ILO.

Jason

[ChrisLynchHPE]

You need to add the iLO and Server (ESXi) Global Credentials or at the Server level.  Take a look at Page 11 of the HP OneView for vCenter 7.5.1 User Guide on how to do this.

[jason blake]

Hi Chris..

thanks for the reply. I have already added the ILO credentials both at the server and global levels. Any more ideas ?

Jason.

[vcblades]

No luck same result @ 11/27/2015 with all latest versions and server status says normal and ilo unavailable

[gfarge]

Try restarting oneview related services