HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

HP VC FlexFabric 10Gb/24-Port Module keep old IP address

PieteratZA
Visitor

HP VC FlexFabric 10Gb/24-Port Module keep old IP address

I am reusing a Flexfabric Module , but it keep the old IP address.

I did assign a new IP address then connecting to it divert to the old network which does not exist anymore.

I did factory reset but does not help.

I cant connect to it via SSH or Web or Via Oneview.

Thanks

P.

2 REPLIES
ChrisLynchHPE
Neighborhood Moderator

Re: HP VC FlexFabric 10Gb/24-Port Module keep old IP address

How did you assign a new IP Address?  Are you using the Enclosure Bay IP Addressing feature of the Onboard Administrator, or external DHCP?

There is no interface on the module to "set" an IP Address.

PieteratZA
Visitor

Re: HP VC FlexFabric 10Gb/24-Port Module keep old IP address

Yes did it on the OA.

IP works,  show login screen but disabled, then divert to the old IP.

I will try that swopping and see if that do anything what you suggested on other posts.

Please note the one module does work correctly, and I imported the enclosure into Oneview but this module with old IP does not become active in Oneview.

Thanks

P