HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

HP_oneview

 
Mohsin13
Occasional Visitor

HP_oneview

Hi all,

 

Im having issues with HPONEVIEW my oneview is unable to identify fabrics under actual networks tab when  I add an array

 

at the backend we have BNA 12.1.4 integrated with SMIS interface where oneview talks to my fabric infra(servers --->brocadefabric---->3par array)

 

 

 

1 REPLY
ChrisLynchHPE
Neighborhood Moderator

Re: HP_oneview

Hello Mohsin13.  Can you please be a bit more specific with what your issue is?  From the screenshot, it appears that there is no link being reported by the X3 interface of the Interconnect module.  Have you defined the correct FC Network type; Fabric versus Direct Attach?  Are you sure you have the correct FC uplink port connected to your Brocade SAN fabric switch?  Brocade SAN Network Advisor has nothing to do with a Layer 1 issue.