HPE SAN Manager -- Add - HPE OneView 3.0

[gk061188]

Getting this snmp write error while adding HPE San Manager on to HPE OneView

"Unable to add SAN manager.

SNMPv3 user does not have write permission.
Resolution: Configure the write permissions of the snmp user on the switch and retry the operation."

But as per management and deployment guide switch side configuration was done. Any suggestions to resolve this issue helps a lot.

[ChrisLynch]

Have you made sure that your HPEN 5900cp switch was configured with an SNMPv3 user with read and write previledges?  Can you share your switch configuration?

[gk061188]

Here it is,

#
 
 snmp-agent

 snmp-agent local-engineid 800063A2805C8A38A7F81000000001

 snmp-agent community write public mib-view test

 snmp-agent log all

 snmp-agent sys-info version all

 snmp-agent group v3 admin write-view All2View

 snmp-agent group v3 group1 privacy read-view viewDefault write-view viewDefault notify-view viewDefault

 snmp-agent mib-view included All2View iso

 snmp-agent mib-view included All2View snmp

 snmp-agent mib-view included Default iso

 snmp-agent mib-view included all iso

 snmp-agent mib-view included test iso

 snmp-agent mib-view included test snmp

 snmp-agent mib-view included v1Default iso

 snmp-agent mib-view included viewDefault iso

 snmp-agent mib-view included viewDefault snmp

 snmp-agent usm-user v3 admin admin

 snmp-agent usm-user v3 user1 group1 cipher authentication-mode sha $c$3$nNHtSvRoAt/JpKxXsEQ+mX8/14fQSMu9yoCMpqoKwgAUPu/759w= privacy-mode aes128 $c$3$4t4cMW1/abbQtPqOq4y/KbKDwR6ke4ztveb40e8j1ZgGdQ==

 snmp-agent trap enable arp

 snmp-agent trap enable fc

 snmp-agent trap enable radius

please correct me if the above config is wrong.

[gk061188]

Looking forward for a help.

[gk061188]

If anyone has any suggestions, please post the same here. Looking forward for some help.