HPE SuperDome Flex on OneView Environment

[andreas_msg]

Hi, 

Is there any guide to add HPE SuperDome Flex on OneView after adding Rack Management Controller?

Thanks.

[support_s]

System recommended content:

1. HPE Superdome Flex Server User Guide

2. HPE OneView 6.10 Support Matrix | HPE OneView managed Superdome Flex firmware updates on the rack manager

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[ChrisLynch]

Simply adding the RMC should be enough.  You need to create your partitions from the RMC, as that is not available from OneView.  Once the partitions have been created, they show up under Server Hardware as a "server" resource you can then create and assigna server profile to.

[andreas_msg]

Thanks ChrisLynch for your answer. That mean, if you want to add SuperDome Flex, first step i should create at least one nPAR then i can add to OneView on that nPAR as a Server Hardware? 

Regards,

Andreas

[ChrisLynch]

You can create the partition after adding the RMC/eRMC as a Rack Manager to OneView, then they will show up as server hardware resources.

[andreas_msg]

Thanks, based on your reply i should create nPAR first then add to OneView Dashboard?

Or we can directly add to existing OneView environment?

Thanks

[ChrisLynch]

Sorry for the late reply here.  You create your nPar in the Rack Manager itself.  Then, if you have already added the Rack Manager to OneView, you simply refresh it and the partition will show up within the complex and the partition will also show as a Server Hardware resource.  OneView does not provide the means to create or remove nPars from the Rack Manager.