HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

MattGG
Advisor

How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

Upgraded our OneView appliance from 1.2 to 1.2.03.   After the upgrade I noticed that the OV included 11.3.14 FW bundle was not longer working.

 

Since I cannot download this bundle to re-add it,  what do I need to do to get it working again?

 

Thanks,

-Matt

7 REPLIES
ChrisLynchHPE
Neighborhood Moderator

Re: How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

Can you please tell me what exactly "isn't working"?  Is the baseline still present within the appliance?  Are you able to assign it to a Server Profile?

MattGG
Advisor

Re: How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

It is gone from the OneView interface.   Since it is no longer in the interface I cannot apply it to new server profiles.

 

-MattG

 

ChrisLynchHPE
Neighborhood Moderator

Re: How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

Do you have any other baselines within the appliance?  Did someone accidentally delete the baseline?  We have not observed the patch deleting or removing any baselines present on our testing systems, nor in other customer environments I have supported upgrading their appliances.

 

However, as it is an unreleased SPP (although it was bundled with the HP OneView 1.20 appliance), I can provide you with an ISO to re-upload into your appliance.  I will private message you with the URL once I have it.

MattGG
Advisor

Re: How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

That would be great.

 

We upgraded from 1.2.0 to 1.2.03 and OneView stated the 11/14 FW bundle was corrupt.   We removed the bundle.

 

If you could get me the link to the ISO that would be great!

 

Thanks,

-MattG

ChrisLynchHPE
Neighborhood Moderator

Re: How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

I'm working on that.  And in the meantime, please open a support case for this.

Simon-Heather
Occasional Contributor

Re: How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

Hi Chris,

 

I've hit the same issue as Matt, i.e. the built-in 2014.11.30.05 SPP has become corrupted. Can I have a download link for the ISO too?

 

I had upgraded OneView to v1.20.03 and I'd also tested restoring a backup to it. Not sure at what point the bundle got corrupted.

 

Regards,

 

Simon Heather

ChrisLynchHPE
Neighborhood Moderator

Re: How to add back OneView 11.3.14 OV Firmware after upgrade to 1.2.03

I have been instructed for any customer experiencing this issue to open a support case for resolution.