HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

Migrate Oneview and C7000 into new subnet

 
SOLVED
Go to solution
Mainecoon
Advisor

Migrate Oneview and C7000 into new subnet

Wondering if it is possible to migrate Oneview and several C7000 enclosures into another subnet, so basicly we need to re-ip both. I know we can still access OA, but since we imported the C7000 into OV it took over control of the VC, so wonder if it is still possible to re-ip and moved everything into diff. subnets or do we need to start from scratch?

3 REPLIES 3
ChrisLynchHPE
Neighborhood Moderator

Re: Migrate Oneview and C7000 into new subnet

You can re-address your enclosures.  I would suggest doing them 1 at a time if you can.  When you do that, a refresh of the enclosure would be needed.  Once that refresh fails, you will need to perform it 1 more time which the UI will then prompt you for new address and credentials.


Accept or Kudo

Mainecoon
Advisor

Re: Migrate Oneview and C7000 into new subnet

Hi Chris thank you for the details!, how about the VC? not sure but i assume it still is using an IP adress from the time before we migrated the enclosures into OV and it took over the access or not? or was that removed that time?

ChrisLynchHPE
Neighborhood Moderator
Solution

Re: Migrate Oneview and C7000 into new subnet

You cannot set static IP addresses to the fabric modules. You control that either with EBIPA or external DHCP.

Accept or Kudo