OneView 2.0 Enclosure ?

[StevieD]

Hi,

 I was testing OneView with V1.20 just for monitoring our enclosures for now. That was ok for monitoring, and I was able to add the enclosures.

I installed V2.0 as a brand new appliance, and then removed the enclosures from the V1.20 OneView appliance. I then added the enclosures, and 14 of the 16 are fine, but I have 2 that are stuck on refresh blades and interconnects. I am unable to stop these, if I try to issue a new refresh or to remove the enclosure(s) it displays that I have to wait until the current process is finished. I have attempted restarting the V2.0 appliance, and I have restarted the OA's on the enclosures, but I'm still stuck in the same spot. How can I get these add processes

stopped/killed and be able to remove these so I can attempt to add them again??

Thanks,

Steve

[ChrisLynch]

This is likely due to an issue with the iLO firmware. Can you confirm what version of iLO firmware is installed? We are recommending customers update to 2.30.

[StevieD]

Thanks for the quick reply. I have a mix of gen7 and gen6 blades. Which is a mix if ILO 2 and ILO 3, I think the 2.30 you mentioned is for ILO 4? Here is a list of the blades and ILO. I think I can add these since it's just for monitoring.  The ILO 2

is at 2.25 and the ILO 3 is at 1.80, except for one that is 1.82.  IS there a matrix for what the version of ILO should be for use with Oneview?

1 ProLiant BL460c G7
Discovered: No System ROM I27 07/02/2013        

iLO3

iLO3  1.80 Jul 11 2014

        Power Management Controller

1.6

    2 ProLiant BL460c G7
Discovered: No System ROM I27 07/02/2013        

iLO3

iLO3  1.80 Jul 11 2014

        Power Management Controller

1.6

    3 ProLiant BL460c G7
Discovered: No System ROM I27 07/02/2013        

iLO3

iLO3  1.80 Jul 11 2014

        Power Management Controller

1.6

    5 ProLiant BL460c G6
Discovered: No System ROM I24 01/29/2011        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    6 ProLiant BL460c G6
Discovered: No System ROM I24 03/30/2010        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    7 ProLiant BL460c G6
Discovered: No System ROM I24 01/14/2010        

iLO2

2.25 Apr 14 2014

        Power Management Controller

Not Available

    8 ProLiant BL460c G6
Discovered: No System ROM I24 01/14/2010        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    9 ProLiant BL460c G6
Discovered: No System ROM I24 01/14/2010        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    10 ProLiant BL460c G6
Discovered: No System ROM I24 10/13/2010        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    11 ProLiant BL460c G6
Discovered: No System ROM I24 01/14/2010        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    12 ProLiant BL460c G6
Discovered: No System ROM I24 01/22/2015        

iLO2

2.27 Jan 27 2015

        Power Management Controller

3.4

    13 ProLiant BL460c G6
Discovered: No System ROM I24 12/02/2011        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    14 ProLiant BL460c G6
Discovered: No System ROM I24 03/30/2010        

iLO2

2.25 Apr 14 2014

        Power Management Controller

3.4

    15 ProLiant BL460c G7
Discovered: No System ROM I27 05/05/2011        

iLO3

1.82 Jan 15 2015

        Power Management Controller

1.6

[UnskilledITGuy]

Was this ever resolved? I also am having trouble while adding an enclosure to OneView 2.0 and can't seem to figure out how to stop the operation.