HPE OneView
1748217 Members
4251 Online
108759 Solutions
New Discussion

Re: OneView and non-VC Interconnect Modules

 
SOLVED
Go to solution
Richard Chan
Occasional Contributor

OneView and non-VC Interconnect Modules

 

In an environment with non-VC switches (e.g c7000 + 6120xg), is OneView still useful?

 

What happens when OneView replaces Insight?

 

From what I've been reading, OneView seems to work best in VC Flex environments.

 

2 REPLIES 2
ChrisLynch
HPE Pro
Solution

Re: OneView and non-VC Interconnect Modules

HP OneView requires the presense of redundant Virtual Connect Ethernet-capable modules (minimum of 2.)  Other non-VC modules can be inserted into the enclosure, but they will be unmanaged/unclaimed by OneView, and the associated adapters will not be managed (Connections in the Server Profile.)

 

As for Insight Control, we will continue to support that platform for both HP and heterogenious environments.  I would encourage you to reach out to your HP Sales Team or Partner for more information.

 

We cannot comment on futures and unreleased/unannounced products in a Public forum such as this. 


I am an HPE employee

Accept or Kudo

Ankit_Yadav
Senior Member

Re: OneView and non-VC Interconnect Modules

HP as of now with Oneview1.05 provides Full support for :

 

>HP Virtual Connect FlexFabric 10Gb/24-Port Module. 
>HP Virtual Connect Flex-10 10Gb Ethernet Module.
>HP Virtual Connect Flex-10/10D Module for HP BladeSystem C-class.

 

All other HP or Non HP VC modules can work in environment with unmanaged support.

 

For detailed info on Interconnect Modules and configurations supported,you may refer to HP Oneview1.05 Support matrix here: http://hp.com/go/oneview/docs.