HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

OneView how to refresh dns cache

 
RubenDaendliker
Occasional Visitor

OneView how to refresh dns cache

Hi

We monitor our servers with oneview 2.0. After a location change of the servers oneview can't find the ilo address anymore because at the new location the servers ilo has a new dhcp adress.
I have restarted the oneview appliance but it still tries to connect to the old ip address. How can I refresh the ipconfig of the appliance or why does the appliance tries to connect to the ip address instead of the dns address.

I don't want to remove all servers and add all again.

Thanks for an advice.

Ruben

3 REPLIES
ChrisLynchHPE
Neighborhood Moderator

Re: OneView how to refresh dns cache

A refresh of the Server Hardware should prompt you to provide the iLO IP Address/FQDN and credentials.  If you are not prompted, I would ask that you open a support case to resolve this issue.

RubenDaendliker
Occasional Visitor

Re: OneView how to refresh dns cache

This is correct but it is not very efficient when I have to do it on dozens of servers.

martin2176
Advisor

Re: OneView how to refresh dns cache

multi select capability (shift or control ) key does not work on hardware refresh.
I wish multiselect capability was present for all functions