HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

OneView update from 3.00 to 3.10.07

 
SOLVED
Go to solution
IMax77
Occasional Contributor

OneView update from 3.00 to 3.10.07

Hi,

We are planned update OneView from 3.00.07 to 3.10.07.
3.0 - minimum requirements 160GB
3.1 - minimum requirements 275GB
How to expand OneView drive?

May be 160GB is enough for monitored version?

The upgrade process affects to work and availability the attached enclosures and servers?

4 REPLIES
Highlighted
peyrache
Respected Contributor

Re: OneView update from 3.00 to 3.10.07

Hi
>From user guide
You can manually grow the virtual disk to increase the size of the firmware repository. The
best practice is to grow the virtual disk during appliance installation on a VMware vSphere
hypervisor or Microsoft Hyper-V hypervisor.

jy
IMax77
Occasional Contributor

Re: OneView update from 3.00 to 3.10.07

Hi,

We plan to update the existing server but not create a new server.
During the upgrade will there be a choice to increase the disk?

160GB is enough for monitored version?

peyrache
Respected Contributor
Solution

Re: OneView update from 3.00 to 3.10.07

Increase before upgrade
JY
IMax77
Occasional Contributor

Re: OneView update from 3.00 to 3.10.07

The server was updated, everything is fine.