HPE Community
HPE OneView
1752815 Members
5864 Online
108789 Solutions
New Discussion

Re: READ Snmp Hp oneview

 
SupportNC2
Frequent Visitor

‎10-01-2018 01:02 AM

‎10-01-2018 01:02 AM

READ Snmp Hp oneview

Hello, i try to access to one view biew snmp for monitoring my synergy.

I configure my community string in setting, snmp but i cant access to snmp...

snmpwalk -v2c -c nc2snmp 192.168.9.1
Timeout: No Response from 192.168.9.1

 

Have you good an idea for this problem? thanks

0 Kudos
Reply
1 REPLY 1
Sharis
HPE Pro

‎10-05-2018 03:28 AM

‎10-05-2018 03:28 AM

Re: READ Snmp Hp oneview

Hello,

FYI,

SNMPv1 read community string
Credential applied to access data on managed and monitored devices that support SNMPv1 only.

So make sure your read community string is SNMPv1.

Also make sure that you are able to ping to your IP 192.168.9.1 from Synergy setup.

Regards,

I am an HPE Employee

Accept or Kudo

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.