HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

Rack positioning

Pber
Advisor

Rack positioning

I'm trying to position racks within a datacenter.  It works fine with racks that are positioned with an angle of 0 or 180 degrees. 

 

I have a row that runs perpendicular to the rest that I'm trying to position either at 90 or 270 degrees.  This does not work.  The image rotates as expected, but when positioning the rack it still thinks the rack is not rotated and complains about overlap.So I have to leave large gaps between my racks or stagger them like a zig zag.  See attached

 

Am I doing somethig wrong?

 

I'm using version 1.2 of OneView.

3 REPLIES
ChrisLynchHPE
Neighborhood Moderator

Re: Rack positioning

I just tried to do the same rack positioning as you did, and it appears to either be a bug or how rack positioning was designed.  With the rack angle at either 90 or 180, it appears that you cannot put racks adjacent to each other.

 

Let me investigate this further and get back with you.

Swarm
Occasional Advisor

Re: Rack positioning

I have the same issue.   Interested to see a fix

ChrisLynchHPE
Neighborhood Moderator

Re: Rack positioning

This is a defect.  I would kindly ask that you open a support case regarding this issue.