HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMPv3 Engine ID on ProLiant GEN9 iLO

 
NJK-Work
Honored Contributor

SNMPv3 Engine ID on ProLiant GEN9 iLO

As I am adding GEN9 servers to OneView, I am noticing the "SNMPv3 Engine ID" field is blank in the Management page of the iLO.  Whereas, on a GEN10, this is populated.

In general, what is the purpose of the Engine ID?  Does OneView require this?  Will something not work correctly, in regards to OneView, if this is blank?

Thanks

NK

1 REPLY 1
Highlighted
AmRa
HPE Pro

Re: SNMPv3 Engine ID on ProLiant GEN9 iLO

Hi 

The SNMPv3 Engine ID sets the unique identifier of an SNMP engine belonging to an SNMPagent entity. User can configure this value when Agentless Management is selected.
SNMP V3 EngineID Field on the iLO 4 Webpage Will Not Update Until Initialized and Prevents SMNPv3 from Functioning

Please refer customer advisory c04442347 for more information.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04844262

I am an HPE Employee

Accept or Kudo