The maximum number of 75000 alerts has been reached.

[PLAURENT]

Hello,

I am unable to remove alerts on hp one view.

I tried DELETE https://ip / .... copmmand, it do not work.

http://h20566.www2.hpe.com/hpsc/doc/public/display?docId=c05349772&hprpt_id=HPGL_ALERTS_1945565&jumpid=em_alerts_us-us_Dec16_xbu_all_all_890384_1945565_ServersOptionsEnterpriseSoftware_recommended__/

How to select one alert and delete it ? When i try action -> clear, i have
no item selected.

Thanks for any advice.

[ChrisLynchHPE]

You do not need to delete anything. The alert message details state the appliance will automatically remove alerts to create room.

[PLAURENT]

I found how to delete messages with 

delete https:// .... date.

But this is temporary solution.

Every day, i had until i delete messages, one message on my mailbox regarding hp one view !

If i do nothing, messages will stop ? Are you sure ?

[ChrisLynchHPE]

Yes, we know that the Warning alert message will appear if you have Email Alerting enabled. No, the messages will continue, but the appliance will automatically remove older alerts for you. What is happening is that we chose 75,000 max alerts in the internal database. The alert generated when you reach the 75,000 limit should not be Warning, but Informational. If you have OneView 3.00, you could create a custom Email Filter for specific resources you want, which would then exclude the appliance generated alert for when the max alerts condition is reached.

[Michael Leu]

It would be great if the severity of this alert could be changed to Informational in a future OneView release.

[AkiraX]

I eventually did the following:

1. Install the HPE OneView PowerShell  3.00 Library

2. Execute the following:

 Connect-HPOVMgmt -Hostname (OV Appliance) -UserName (Your Username)

 Get-HPOVAlert -State  cleared -Count 1000 | Remove-HPOVAlert

This clears 1000 alerts at a time. You can at least change this value to 10000. Anything too high

will stall the process.