Unable to find Oneview 410.00 Upgrade .bin

[DTBall]

Hi All,

I'm probably just completely lost here, but I just can't seem to find the .bin file for the 4.10 update. Is there one? The download page lists the full VM but I'm not seeing the update file. Do I really need to go to a new install?

DT

[DanCernese0]

HPE is actively working on a potential issue in the OneView 4.10.03 patch release. The OneView 4.10.03 patch release has been removed from the download site until the issue is resolved. Unfortunately due to a secondary supply chain action, the 4.10.01 update was not restored.

We will address this situation as soon as possible.  Sorry for your experience.

[DanCernese0 · Accepted solution]

I don't know if there's a way here to link to another topic; so I am copying my reply here for you to see.

The issue has been sorted.  The files for 4.10.03 will be restored.  The caution learned is that the VM's memory size must be exactly 16GB (no smaller and no bigger) otherwise there's a strong chance the upgrade may fail.  The support pages will take a few days to propagate worldwide.

Sorry for the delay.

[DTBall]

Thanks Dan,

I'll give it a try. I was about to go with the new VM and try to restore from backup but wasn't sure that would work. I have about 300 blades and wasn't looking forward to recreating everything. Of course if I could resist the urge to keep everything up to date I wouldn't have these issues. Thanks again.

[Dennis Handly]

> I don't know if there's a way here to link to another topic

Just paste in the URL:

https://community.hpe.com/t5/HPE-OneView/OneView-4-10-03-Downloaded-10-12-but-no-longer-available-in-SW/m-p/7022206#U7022206