HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

how to change server ip addresses in OneView

kgoucher
Occasional Contributor

how to change server ip addresses in OneView

Hope someone can point me in the right direction for this issue.

I'm having trouble updating server hardware that has changed IP address. 

I've read that I need to remove the hardware and add it in again, but I can't find a way to do this sucessfully.

A number of my server hardware ilo's have new ip addresses. I can't remove the server hardware while its being used by a server profile and when I edit the server profile to unassign the hardware I get an error saying 'unable to update profile'

unable to retrive power state of the hardware. unable to get the server power state from the management processor. connection error to iLO xxx.xxx.xxx.xxx: No route to host.

2 REPLIES
ChrisLynchHPE
Neighborhood Moderator

Re: how to change server ip addresses in OneView

In order to update managed or monitored devices Management IP Address, you simply need to re-add the deivce.  OneView will figure out which was the original device, and update accordingly.

kgoucher
Occasional Contributor

Re: how to change server ip addresses in OneView

Hi

When I add the server  again i get the error

Unable to add server hardware: xxx.xxx.xxx.xxx
The server hardware has already been added as ILOxxxxxxx.

Resolution: Add a different server hardware.