Upgrade failed 4.0.3.4

[KristianLien]

ID 14201
Type System Task
Status Failed
Start time
11. jan. 2020, 0:29:19 CET
End time
11. jan. 2020, 0:32:05 CET
Duration 166 second(s)
Priority Medium
Origin UI
Task details
11.01.2020, 00:29:19
Created
11.01.2020, 00:29:19
Update Tool version 25 (191206)
11.01.2020, 00:30:43
Running pre-update checks for PK-4.0.3.4
11.01.2020, 00:32:04
The following warnings may impact the update, but you may proceed if only warnings are present:
11.01.2020, 00:32:04
port:0:3:3 - SFP is missing
11.01.2020, 00:32:04
port:0:3:4 - SFP is missing
11.01.2020, 00:32:04
port:1:3:3 - SFP is missing
11.01.2020, 00:32:04
port:1:3:4 - SFP is missing
11.01.2020, 00:32:04
port:2:3:3 - SFP is missing
11.01.2020, 00:32:05
port:2:3:4 - SFP is missing
11.01.2020, 00:32:05
port:3:3:3 - SFP is missing
11.01.2020, 00:32:05
port:3:3:4 - SFP is missing
11.01.2020, 00:32:05
Resolution for the above issues:
11.01.2020, 00:32:05
Identify the malfunctioning cable or SFP specified in the issue text. Remove and re-insert the cable/SFP and verify that the port Status LED is solid green and that the amber Fault LED is not illuminated. If re-seating the cable/SFP does not resolve the issue, replace it.
11.01.2020, 00:32:05
Pre-update checks completed with warnings for PK-4.0.3.4
11.01.2020, 00:32:05
Update failed

[KristianLien]

Is it just because I removed 2 SFP+ from each controller? 

[wbbouldin · Accepted solution]

If the only issue is missing SFPs, and you're okay continuing with the update, then you can re-run the update and ignore the warnings. Use the Re-Run button at the bottom of the View Details dialog to do so.

[KristianLien]

-