HPE SimpliVity
cancel
Showing results for 
Search instead for 
Did you mean: 

Checking Simplivity for hardware status and health

 
shang1983
Advisor

Checking Simplivity for hardware status and health

Recently one of my VM reside on the simplivity nodes rebooted few times. I checked the system eventlogs and there's alot of warning on the disk with eventid 153, "The I/O operation at logical block address for disk 0"

Any command to check the simplivity hardware health or check whether simplivity having issues? 

1 REPLY 1
DowS
HPE Pro

Re: Checking Simplivity for hardware status and health

You can run svt-hardware-show to see the status of the disks.

I would suggest that you open a support case to allow one of our engineers to investigate further.


I am an HPE Employee

Accept or Kudo