HPE SimpliVity
cancel
Showing results for 
Search instead for 
Did you mean: 

Error : SimpliVity is unable to reach expected ports on the federation network

 
jmeshal
Occasional Advisor

Error : SimpliVity is unable to reach expected ports on the federation network

we currently added one more OmniCube system, CN-3000. to the group 

not test yet (migration , backup etc)  but seems that everything going smoth after using Deployment Manager and i can see it it's running up in the Vcenter.

but problem that an error appear in alarm on two omnistack

OmniStackVC-10-150-5-183 , 

OmniStackVC-10-150-5-193

 

OmniStackVC-10-150-5-183
Alert
SimpliVity is unable to reach expected ports on the federation network
Vcenter-xxx.com
12/2/2019 7:04:38 AM

Screen Shot 2019-12-02 at 9.43.35 AM.png


 

 

 

I found one "KB" with Title: SimpliVity is Unable to Reach Expected Ports

trying to fix it but where i can run the SQL command?

 

Thanks for your help

1 REPLY 1
DaveOb
HPE Pro

Re: Error : SimpliVity is unable to reach expected ports on the federation network

Sql injects should never be run without support guidence,

this is most likely a network related.

Have you used 3 seperate subnets ?

 can you ping  between storage and federation within the cluster ?

Can you send a non fragmented 9000 mtu ping ?

If the nodes are configured in a back to back configuration are they cabled correctly.

Have you the correct nics teaming policy applied, (refer to install guide)

 


I am an HPE employee
Accept or Kudo