HPE SimpliVity
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE SimpliVity : Host Storage Network issue

 
Highlighted
Occasional Contributor

HPE SimpliVity : Host Storage Network issue

Hello all,

It's me again. 

I have issu with storage network;

Maybe I have a problem with the wiring; the 1rst deployment is done, but failed for the 2nd.
If anybody can share stokage wiring diagram or storage switch config....
Thanks in advance.
Best regards 

9 REPLIES 9
Highlighted
HPE Pro

Re: HPE SimpliVity : Host Storage Network issue

Hi,

Please find below document

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00039816en_us

Hope this helps

Thank You!
I am an HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below. Kudos is a way of saying thank you to a post.
Highlighted
HPE Pro

Re: HPE SimpliVity : Host Storage Network issue

Patel,

Here is a standard vSwitch configuration-

 

vNics.PNG


Accept or Kudo
While I work for HPE, any personal opinions expressed are mine, and not official statements on behalf of HPE.
Highlighted
Advisor

Re: HPE SimpliVity : Host Storage Network issue

If you have "Switch connected" configuration, please check if you have configured Jumbo Frames (MTU 9000) on Storage & Federation ports on the network switch. It is most likely causing the problem.

Highlighted
Occasional Contributor

Re: HPE SimpliVity : Host Storage Network issue

Hello all,

This is my diagramm:

2 HPE switch + 1 HPE DL380 G9 / rack

Schema.png

 

@B0ris

Yes i have configured jumbo

MTU.png

 

Config.PNG

 

Highlighted
Advisor

Re: HPE SimpliVity : Host Storage Network issue

Do you have separated VLANs for Storage AND Federation network, or do you have one VLAN for both, and different IP subnet for Storage and Federation Network ?

Highlighted
Occasional Contributor

Re: HPE SimpliVity : Host Storage Network issue

Hi B0ris,

I have one Vlan (Vlan172) and diferent IP ( 172.18.x.x for Storage) and  (172..19.x.x for Federation)

Best regard

Highlighted
HPE Pro

Re: HPE SimpliVity : Host Storage Network issue

What is your vSwich configuration? Does it follow that diagram? Are they standard vSwitches?


Accept or Kudo
While I work for HPE, any personal opinions expressed are mine, and not official statements on behalf of HPE.
Highlighted
Occasional Contributor

Re: HPE SimpliVity : Host Storage Network issue

Hi MikeSeden
Yes, i use standard Vswitch
BR
Highlighted
Occasional Advisor

Re: HPE SimpliVity : Host Storage Network issue

Hello @Patai,

The best practice is to use 3 different vlans while deploying SimpliVity Management, Storage and Federation. Also you should enable Jumbo Frames (MTU 9000) on Storge and Federation vlans. Also if you have any rules blocking ports you should refer to SimpliVity site readiness checklist.

One done, reset the discovery state of your node and re-run the test.