OmniStack 3.7.9 interoperability with vSphere 6.7U2 ?

[fahlis]

Hello!
According to the HPE TekTalk for OmniStack 3.7.9 it comes with support for vSpehre 6.7U2.

http://vshow.on24.com/vshow/HPETekTalks/#content/2018821
The same is stated in the Q&A for HPE Product Update: Discover Announcements Webinar
https://event.on24.com/wcc/r/2031522/53E49E2477FD16E03E9BC97506F54D73

Q: Hi, This is available with ProLiant DL and Nimble now. Not Synergy.

Is really VMware 6,7 U2 supported for 3.7.9 ??

A: Yes, it is supported

However when checking the OmniStack 3.7.9 Interoperabiltiy guide.

https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-a00072859en_us&withFrame

It says vSphere 6.7U1 / vCenter 6.7U1b

So, what is the truth here ?

I am about to upgrade a couple of customers and if really supported I will go with 6.7U2. But I need to have a confirmation from someone who really knows. 

Anyone who have upgraded to 3.7.9 with vSphere 6.7U2 / vCenter 6.7U2

Thx / Tony

[JohnHHaines · Accepted solution]

Unfortunately, support for 6.7 U2 was planned for 3.7.9, but did not make it into the release. 

It should be in the next release, 3.7.10.

[fahlis]

Thanks for the clarification John!

Br / Tony

[Matthew Ingram]

do we know when 3.7.10 will be released and what ESXi builds will be supported?

[Kevin4]

3.7.10 is released and according to the doc, it is comptable with 6.7 EP 9, which is a few EP past 6.7 Update 2.  Can someone at HPE confirm this is really the case and not a documentation error?

[AnkiN]

Hi @Kevin4 , 
If you are asking with respect to the HPE SimpliVity 380 nodes then Yes ESXi 6.7 EP Patch 09 is supported.
You can refer with https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-a00080626en_us&withFrame

[AnkiN]

@Matthew Ingram 

The 3.7.10 is released. 
You can refer to below link for the HPE SimpliVity Interopt guide for ESXi Build details
https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-a00080626en_us&withFrame