Step 10 of 42:err_dply_timeout_booting_hypervisor

[timeout_booting]

Hi everybody,

i'm trying to deploy 2 svty nodes, with 4.0.1  and i have this error:

ERROR: Step 10 of 42: ERR_DPLY_TIMEOUT_BOOTING_HYPERVISOR: Time out ocurred while waiting for the hypervisor to boot

Could you help me?

[gustenar]

Hello @timeout_booting 

When you are at this step watch the ILO console and see if the server is booting to the OS. If it is, it might be possible the network is not responding on time. Check if you can ping the IP of the host when you enter this step, it might take a few minutes to respond. 

[Ravindra7]

ERROR: Step 10 of 42: ERR_DPLY_TIMEOUT_BOOTING_HYPERVISOR:Time out occured while waiting for thehypervisor to boot 192.168.1.201

and 

im booting time watching ILO  and Desktop ping server and Vcenter PInging also. . . . . . .   . 

same error is there 

could you help me

booting waiting hyperviser .....

[Ravindra7]

HPE-SIMLEVITY-PLUG-IN-VSPHERE-CLIENT-LINUX-X64-17.25.2-PSI18 Installing in vcenter

this SIMPLIVITY software suitble for Deploy-installer-10.35.0+sva-3.7.10.200-usb 

could you tellme : (Y/N) 

[Mahesh202]

Hi Ravindra.

The answer is Yes, it will be supported.

Please refer to the below image. 

 
Hope this helps.!!

Regards
Mahesh

[kadir34]

Hi,

Did you get a solution for your problem? I have a same problem on my host?

[Sunitha_Mod]

Hello @kadir34, 

Thank you for writing to us! Since you have posted in an old topic and there is no response yet, I would recommend you create a new topic using the create "New Discussion" button, so the experts can check and assist you further.