Network Orcestrator 2.3 Issues

[Cali]

Hello,

I have Installed a new NetIO ESX based 2.3.0.5 on Customer Site with 180 Day Trial.

There I have a network issue.

The Network Link from the Appliance is randomly going offline.
This is happening, every Time by adding a new System.

We have to issue "systemctl restart network" to bring up again.

Cali

[Yeskay]

Hi Cali,

It seems to me that this issue could be due to DHCP IP setup for Neto. I would suggest that you assign a static IP address to Neto and check the status. To assign static IP, please refer page 141 of user guide: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00055380en_us

Make sure that the Network Orchestrator installation meets the system requirement specified as per HPE SPOCK https://h20272.www2.hpe.com/spock/utility/document.aspx?docurl=Shared%20Documents/sw/smart_fabric_orchestrator/network_orchestrator.pdf

If the issue remains the same, upgrade Neto to the latest version 2.4.0 which can be downloaded from https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_9a98f3d52a4644eba8ac1bb652