ALB Bond for p4300G2

[jasp2k]

newbie at installing a p4300. I would like to setup a bond for the 2x10Gb nics. Do i need to configure a static ip for both nics and then create a bond via CMC or configuring 1 nic w. static is all thats required then configuring bond via cmc

[Bart_Heungens · Accepted solution]

Hi,

1 NIC is OK to be configured , the other can be on DHCP or so, not that important...

When creating the bond, it will take the fixed IP address across the 2 NICs...

Kr,

Bart

[jasp2k]

Thanks