HPE Community
StoreVirtual Storage
1752350 Members
5908 Online
108787 Solutions
New Discussion

HP Lefthand nodes powering on after shutdown

 
Thomas Mill
Occasional Contributor

‎06-28-2013 01:48 AM - last edited on ‎06-30-2013 07:43 PM by

‎06-28-2013 01:48 AM - last edited on ‎06-30-2013 07:43 PM by

HP Lefthand nodes powering on after shutdown

Hi all,

 

Just going through a Datacentre move for my passive hardware (The kit on the passive Datacentre), and whilst setting it all up I had to power on 5 of the P4500's.

 

I then powered them all off, but a few hours after doing so they all came up of their own accord!!

 

Why is this? I've never tinkered with the power setitngs..... can you point me towards where to find out these settings.

T

 

 

 

P.S. This thread has been moved from Storage Area Networks (SAN) >
 Storage Area Networks (SAN) (Small and Medium Business) >  to HP StoreVirtual / HP LeftHand Storage. -HP Forum moderator

0 Kudos
Reply
1 REPLY 1
oikjn
Honored Contributor

‎07-01-2013 06:04 AM

‎07-01-2013 06:04 AM

Re: HP Lefthand nodes powering on after shutdown

I can't say for sure, but maybe there is something int he bios configured to power on automatically after power failure as opposed to "last state" or "always off".  I haven't seen the bios for your model, but its just a computer and most other bios' have that option so I would assume that one does as well.  I would be that option is configured and they lost and then regained power and therefore turned on.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.