HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

HP P4500 G2 SAN\iQ 10.5 - reset to default settings

ebesztak
Frequent Visitor

HP P4500 G2 SAN\iQ 10.5 - reset to default settings

Hi,
is there any way to reset to factory settings? I don't know way but I can't log on to console with default user and password (admin/admin). When I first time turn on devices I set only IP addresses and don't create any user (I thought that for test enviroment will be). Then I created MG in CMC and there I create new user and possword. After two days I decided to remove all my configuration so I delete MG. Then when I try to logon to console (with kayboard connected to device) or with putty (ssh) I can't log on ... Default admin/admin doesn't work so please, there is any method to reset to default settings? I need quick response.

Thanks

5 REPLIES
vlho
Advisor

Re: HP P4500 G2 SAN\iQ 10.5 - reset to default settings

Hi,

 

you download Quick Restore DVD from here: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=StoreVirtualSW

and boot.

 

You will need USB flash with license key...

Emilo
Trusted Contributor

Re: HP P4500 G2 SAN\iQ 10.5 - reset to default settings

Warning

If you do the quick restore and dont have the license key (toast) you will destroy them and have to get a key.

The easiest way is to just call support and they can reset it for you.

If... You want to just start over the get the console of one the systems or however how many you have and remove them from the management groups.

If you do want to do the quick restore make sure you get the license key and put it a file so on a usb stick.

Here are the inructions if you want to go that route.

http://h10032.www1.hp.com/ctg/Manual/c02008653.pdf

 

ebesztak
Frequent Visitor

Re: HP P4500 G2 SAN\iQ 10.5 - reset to default settings

Thanks for advices, I will call to support :)

Re: HP P4500 G2 SAN\iQ 10.5 - reset to default settings

Hi,

 

For HP Store Virtual 4000 series SAN Solution querries you can also visit the HP Guided troubleshooting tree.

Below is the link for HPGT:

 

http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=12169&prodSeriesId=3936136&lang=en&cc=us

 

 

Regards,

PS
To assign points on this post? Click the white Thumbs up below!
Spence73
Occasional Visitor

Re: HP P4500 G2 SAN\iQ 10.5 - reset to default settings

Login using the username and password you created for the MG.