HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

LACP - load balancing mode

IngoK
Occasional Visitor

LACP - load balancing mode

I am planning to add a cluster of 4 P4500 lefthands to a Cisco 2960 stack. 

I would want to use 802.3ad for load sharing.

There 3 VMware hosts connected to the same switch.

The VMware hosts are using EtherChannels. The only load balancing mode supported by VMware is "src-dst-ip" on the Cisco switch. This value is global for both EtherChannel and LACP.

I couldn't find any reference what the supported or recommended load balancing mode is for the lefthands when running 802.3ad

Is it OK to set it to "src-dst-ip" on the Cisco side?

1 REPLY
TurbinYA
Occasional Advisor